
New Holland W190B
| Wheel Loaders
Engine
Engine make: |
FPT |
Engine model: |
667TA/EBD |
Net engine power (hp): |
213 |
Bucket
Bucket capacities, min-max (cu yds): |
3.44 |
Bucket widths, min-max (in): |
115.3" - 120.0" |
Reference: Bucket capacity (cu yds): |
3.44 |
Reference: Bucket edge: |
-- |
Drivetrain
Number of speeds (fwd/rev): |
4 / 3 |
Transmission type*: |
PS |
Max travel speed, fwd/rev (mph): |
23.0 / 15.7 |
Tires
Reference tire size: |
-- |
Weight
Operating weight (lbs): |
38,957 |
Performance
Breakout force (lbs): |
40,737 |
Static tip load, straight (lbs): |
32,083 |
Static tip load, full turn (lbs): |
27,789 |
Dump clearance, full height @ discharge (ft/in): |
10' 1.5" |
Dump reach, full height @ discharge (in): |
38.8" |
Bucket hinge pin height (in): |
162.3" |
Bucket linkage type*: |
Z |
Total cycle time: raise, dump & lower (sec): |
11.73 |
Dimensions
Wheelbase (ft/in): |
11' 0" |
Ground clearance (in): |
16.4" |
Length w/bucket on ground (ft/in): |
25' 3" |
Width over tires (ft/in): |
9' 5.6" |
Height to top of cab (ft/in): |
11' 4.5" |
Turn angle, either side (deg): |
33° |
Turning radius, bucket carry (ft/in): |
19' 10" |
Bucket linkage type* = Parallel (P); Parallel w/bellcrank (PB); Parallel w/ floating bell crank (PFB); Telescopic extended (TE); Z-Bar (Z); Inverted Z-Bar (IZ); Torque parallel (TP);
Transmission type* = Hydrostatic (HS); Mechanical (Mech); Power shift (PS); Automatic (Auto); Automatic with manual shift (Auto/MS); Automatic multi-mode (Auto/MM); Power shuttle (Pwr shutl); Synchromesh (Sy); Torque converter (TC); Powersynchro (PwrSy)
Transmission type* = Hydrostatic (HS); Mechanical (Mech); Power shift (PS); Automatic (Auto); Automatic with manual shift (Auto/MS); Automatic multi-mode (Auto/MM); Power shuttle (Pwr shutl); Synchromesh (Sy); Torque converter (TC); Powersynchro (PwrSy)