Case 621EXR

| Wheel Loaders High Lift

Compare
Print

Weight

Operating weight (lbs):

27,604

Operating weight (lbs):

27,406

Performance

Breakout force (lbs):

23,925

Breakout force (lbs):

23,249

Static tip load, straight (lbs):

18,680

Static tip load, straight (lbs):

22,795

Static tip load, full turn (lbs):

16,178

Static tip load, full turn (lbs):

19,836

Dump clearance, full height @ discharge (ft/in):

10' 7"

Dump clearance, full height @ discharge (ft/in):

9' 2"

Dump reach, full height @ discharge (in):

40.5"

Dump reach, full height @ discharge (in):

39.9

Bucket hinge pin height (in):

167"

Bucket hinge pin height (in):

150.8"

Bucket linkage type*:

Z

Total cycle time: raise, dump & lower (sec):

12.7

Total cycle time: raise, dump & lower (sec):

6.3

Drivetrain

Number of speeds (fwd/rev):

4 / 3

Transmission type*:

Auto/MS

Tires

Reference tire size:

20.5 - 25

Reference tire size:

20.5X25 L2

Bucket

Bucket capacities, min-max (cu yds):

2.17 - 3.00

Bucket capacities, min-max (cu yds):

2.56 - 2.32

Bucket widths, min-max (in):

102.4"

Reference: Bucket capacity (cu yds):

3.00

Reference: Bucket capacity (cu yds):

3.0

Reference: Bucket edge:

Bolt-on

Engine

Engine make:

Case

Engine model:

667TA/EDB Tier 3

Engine model:

667TA/EDB Tier III

Net engine power (hp):

162

Net engine power (hp):

146

Dimensions

Wheelbase (ft/in):

9' 6"

Wheelbase (ft/in):

9' 7"

Ground clearance (in):

14.4"

Length w/bucket on ground (ft/in):

25' 8"

Length w/bucket on ground (ft/in):

24' 2"

Width over tires (ft/in):

8' 3"

Height to top of cab (ft/in):

11' 2"

Turn angle, either side (deg):

40°

Turning radius, bucket carry (ft/in):

17' 4"

Turning radius, bucket carry (ft/in):

17' 3"
Bucket linkage type* = Parallel (P); Parallel w/bellcrank (PB); Parallel w/ floating bell crank (PFB); Telescopic extended (TE); Z-Bar (Z); Inverted Z-Bar (IZ); Torque parallel (TP);

Transmission type* = Hydrostatic (HS); Mechanical (Mech); Power shift (PS); Automatic (Auto); Automatic with manual shift (Auto/MS); Automatic multi-mode (Auto/MM); Power shuttle (Pwr shutl); Synchromesh (Sy); Torque converter (TC); Powersynchro (PwrSy)