Case 570M XT Series 3

| Toolcarriers

Compare
Print

Engine

Engine make:

Case

Engine model:

445T/M3 Tier 3

Net power (hp):

79

Bucket

Bucket capacities, min-max (cu yds):

1.03 - 1.04

Bucket widths, min-max (in):

82"

Reference: Bucket capacity (cu yds):

1.04

Reference: Bucket edge:

Bolt-on

Drivetrain

Number of speeds (fwd/rev):

4 / 4

Transmission type*:

Sy/Pwr shutl

Max travel speed, fwd/rev (mph):

25.2 / 25.2

Tires

Reference tire size:

12x16.5 F; 19.5Lx24 R

Weight

Operating weight (lbs):

10,537

Performance

Breakout force (lbs):

9,271

Static tip load, straight (lbs):

--

Static tip load, full turn (lbs):

--

Dump clearance, full height @ discharge (ft/in):

9' 8"

Dump reach, full height @ discharge (in):

25.9"

Bucket hinge pin height (in):

134"

Bucket linkage type*:

--

Total cycle time: raise, dump & lower (sec):

8.8

Dimensions

Wheelbase (ft/in):

7' 0"

Ground clearance (in):

10.9"

Length w/bucket on ground (ft/in):

16' 11"

Width over tires (ft/in):

6' 7"

Height to top of cab (ft/in):

9' 0"

Turn angle, either side (deg):

--

Turning radius, bucket carry (ft/in):

12' 2.5"
Bucket linkage type* = Parallel (P); Parallel w/bellcrank (PB); Parallel w/ floating bell crank (PFB); Telescopic extended (TE); Z-Bar (Z); Inverted Z-Bar (IZ); Torque parallel (TP);

Transmission type* = Hydrostatic (HS); Mechanical (Mech); Power shift (PS); Automatic (Auto); Automatic with manual shift (Auto/MS); Automatic multi-mode (Auto/MM); Power shuttle (Pwr shutl); Synchromesh (Sy); Torque converter (TC); Powersynchro (PwrSy)