Print
Comparing Toolcarriers
Description |
|||
|---|---|---|---|
| Performance | |||
| Breakout force (lbs) | 33,960 | ||
| Static tip load, straight (lbs) | 29,930 | ||
| Static tip load, full turn (lbs) | 25,470 | ||
| Dump clearance, full height @ discharge (ft/in) | 9' 4" | ||
| Dump reach, full height @ discharge (in) | 50" | ||
| Bucket hinge pin height (in) | 161" | ||
| Bucket linkage type* | TP | ||
| Total cycle time: raise, dump & lower (sec) | 10 | ||
| Dimensions | |||
| Wheelbase (ft/in) | 10' 6" | ||
| Ground clearance (in) | 17" | ||
| Length w/bucket on ground (ft/in) | 26' 8" | ||
| Width over tires (ft/in) | 8' 9" | ||
| Height to top of cab (ft/in) | 11' 1" | ||
| Turn angle, either side (deg) | 40° | ||
| Turning radius, bucket carry (ft/in) | -- | ||
| Weight | |||
| Operating weight (lbs) | 42,590 | ||
| Engine | |||
| Engine make | Volvo | ||
| Engine model | D7E LA E3 (Tier 3) | ||
| Net power (hp) | 240 | ||
| Drivetrain | |||
| Number of speeds (fwd/rev) | 4 / 4 | ||
| Transmission type* | Auto/PS | ||
| Max travel speed, fwd/rev (mph) | 23.0 / 23.0 | ||
| Bucket | |||
| Bucket capacities, min-max (cu yds) | 3.5 - 12.4 | ||
| Bucket widths, min-max (in) | 113" - 134" | ||
| Reference: Bucket capacity (cu yds) | 4.4 | ||
| Reference: Bucket edge | Bolt-on | ||
| Tires | |||
| Reference tire size | 23.5R25 | ||
Bucket linkage type* = Parallel (P); Parallel w/bellcrank (PB); Parallel w/ floating bell crank (PFB); Telescopic extended (TE); Z-Bar (Z); Inverted Z-Bar (IZ); Torque parallel (TP);
Transmission type* = Hydrostatic (HS); Mechanical (Mech); Power shift (PS); Automatic (Auto); Automatic with manual shift (Auto/MS); Automatic multi-mode (Auto/MM); Power shuttle (Pwr shutl); Synchromesh (Sy); Torque converter (TC); Powersynchro (PwrSy)
Transmission type* = Hydrostatic (HS); Mechanical (Mech); Power shift (PS); Automatic (Auto); Automatic with manual shift (Auto/MS); Automatic multi-mode (Auto/MM); Power shuttle (Pwr shutl); Synchromesh (Sy); Torque converter (TC); Powersynchro (PwrSy)