Print
Comparing Wheel Loaders
Description |
|||
|---|---|---|---|
| Tires | |||
| Reference tire size | -- | ||
| Bucket | |||
| Bucket capacities, min-max (cu yds) | 2.1 | ||
| Bucket widths, min-max (in) | 100.4" - 101.1" | ||
| Reference: Bucket capacity (cu yds) | 2.1 | ||
| Reference: Bucket edge | -- | ||
| Drivetrain | |||
| Number of speeds (fwd/rev) | 4 / 3 | ||
| Transmission type* | PS | ||
| Max travel speed, fwd/rev (mph) | 22.3 / 14.1 | ||
| Engine | |||
| Engine make | FPT | ||
| Engine model | 445TA/EGE | ||
| Net engine power (hp) | 124 | ||
| Weight | |||
| Operating weight (lbs) | 25,678 | ||
| Dimensions | |||
| Wheelbase (ft/in) | 9' 0.3" | ||
| Ground clearance (in) | 14.85" | ||
| Length w/bucket on ground (ft/in) | 22' 7" | ||
| Width over tires (ft/in) | 7' 10" | ||
| Height to top of cab (ft/in) | 10' 9" | ||
| Turn angle, either side (deg) | 34° | ||
| Turning radius, bucket carry (ft/in) | 16' 4" | ||
| Performance | |||
| Breakout force (lbs) | 21,650 | ||
| Static tip load, straight (lbs) | 15,138 | ||
| Static tip load, full turn (lbs) | 12,945 | ||
| Dump clearance, full height @ discharge (ft/in) | 8' 6" | ||
| Dump reach, full height @ discharge (in) | 40.6" | ||
| Bucket hinge pin height (in) | 147.4" | ||
| Bucket linkage type* | Z | ||
| Total cycle time: raise, dump & lower (sec) | 13.1 | ||
Transmission type* = Hydrostatic (HS); Mechanical (Mech); Power shift (PS); Automatic (Auto); Automatic with manual shift (Auto/MS); Automatic multi-mode (Auto/MM); Power shuttle (Pwr shutl); Synchromesh (Sy); Torque converter (TC); Powersynchro (PwrSy)
Bucket linkage type* = Parallel (P); Parallel w/bellcrank (PB); Parallel w/ floating bell crank (PFB); Telescopic extended (TE); Z-Bar (Z); Inverted Z-Bar (IZ); Torque parallel (TP);
Bucket linkage type* = Parallel (P); Parallel w/bellcrank (PB); Parallel w/ floating bell crank (PFB); Telescopic extended (TE); Z-Bar (Z); Inverted Z-Bar (IZ); Torque parallel (TP);