Print
Comparing Super Long Front Crawler Excavators
Description |
|||
|---|---|---|---|
| Performance | |||
| Arm (stick) length used for dimensions & forces (ft/in) | 26' 4" | ||
| Max dig depth (ft/in) | 49' 4" | ||
| Max depth of vertical wall (ft/in) | 44' 0" | ||
| Reach @ ground level (ft/in) | 62' 6" | ||
| Dump height (ft/in) | 41' 2" | ||
| Depth @ 8' bottom (ft/in) | -- | ||
| Arm (stick) force* (lbs) | |||
| Bucket digging force* (lbs) | |||
| Lift over end, 20' radius @ ground (lbs) | 15,040 | ||
| Lift over side, 20' radius @ ground (lbs) | 11,770 | ||
| Dimensions | |||
| Transport length (ft/in) | 47' 10" | ||
| Transport height (ft/in) | 11' 2" | ||
| Transport width (ft/in) | 11' 2" | ||
| Length of track on ground (ft/in) | 13' 2" | ||
| Tail overhang over side (ft/in) | 4' 6" | ||
| Engine | |||
| Engine make | Mitsubishi | ||
| Engine model | 6D16-TLEG | ||
| Net hp (hp) | 190 | ||
| Hydraulics | |||
| Total flow of main pumps, implement & swing (gpm) | 126.8 | ||
| Max normal relief valve pressure (psi) | 4,980 | ||
| Weights | |||
| Operating weight (metric tons) | 33.9 | ||
| Operating weight (lbs) | 74,733 | ||
| Bucket | |||
| Bucket width, min-max (in) | -- | ||
| Bucket capacity, SAE heaped, min-max (cu yds) | 0.45 - 0.75 | ||
| Track | |||
| Track shoe or rubber track width (in) | 31.5" | ||
| Max travel speed (mph) | 3.5 | ||
| Max drawbar pull (lbs) | 57,800 | ||
Arm (stick) force* = Normal (N) digging forces are listed when published; otherwise boost values are shown.
Bucket digging force* = Normal (N) digging forces are listed when published; otherwise boost values are shown.
Bucket digging force* = Normal (N) digging forces are listed when published; otherwise boost values are shown.