Print
Comparing Wheel Loaders
Description |
|||
|---|---|---|---|
| Tires | |||
| Reference tire size | 17.5 - 25 | ||
| Bucket | |||
| Bucket capacities, min-max (cu yds) | 2.2 - 3.1 | ||
| Bucket widths, min-max (in) | 96" | ||
| Reference: Bucket capacity (cu yds) | 2.5 | ||
| Reference: Bucket edge | Bolt-on | ||
| Drivetrain | |||
| Number of speeds (fwd/rev) | 4 / 3 | ||
| Transmission type* | Auto/PS | ||
| Max travel speed, fwd/rev (mph) | 23.2 / 14.6 | ||
| Engine | |||
| Engine make | Cummins | ||
| Engine model | QSB4.5 | ||
| Net engine power (hp) | 123 | ||
| Weight | |||
| Operating weight (lbs) | 21,600 | ||
| Dimensions | |||
| Wheelbase (ft/in) | 9' 0" | ||
| Ground clearance (in) | 15" | ||
| Length w/bucket on ground (ft/in) | 22' 10" | ||
| Width over tires (ft/in) | 7' 6" | ||
| Height to top of cab (ft/in) | 10' 5" | ||
| Turn angle, either side (deg) | 40° | ||
| Turning radius, bucket carry (ft/in) | 18' 9" | ||
| Performance | |||
| Breakout force (lbs) | 20,170 | ||
| Static tip load, straight (lbs) | 17,420 | ||
| Static tip load, full turn (lbs) | 15,210 | ||
| Dump clearance, full height @ discharge (ft/in) | 8' 10" | ||
| Dump reach, full height @ discharge (in) | 41" | ||
| Bucket hinge pin height (in) | 143" | ||
| Bucket linkage type* | Z | ||
| Total cycle time: raise, dump & lower (sec) | 9.2 | ||
Transmission type* = Hydrostatic (HS); Mechanical (Mech); Power shift (PS); Automatic (Auto); Automatic with manual shift (Auto/MS); Automatic multi-mode (Auto/MM); Power shuttle (Pwr shutl); Synchromesh (Sy); Torque converter (TC); Powersynchro (PwrSy)
Bucket linkage type* = Parallel (P); Parallel w/bellcrank (PB); Parallel w/ floating bell crank (PFB); Telescopic extended (TE); Z-Bar (Z); Inverted Z-Bar (IZ); Torque parallel (TP);
Bucket linkage type* = Parallel (P); Parallel w/bellcrank (PB); Parallel w/ floating bell crank (PFB); Telescopic extended (TE); Z-Bar (Z); Inverted Z-Bar (IZ); Torque parallel (TP);