Print
Comparing Wheel Loaders High Lift
Description |
|||
|---|---|---|---|
| Performance | |||
| Breakout force (lbs) | 149,970 | ||
| Static tip load, straight (lbs) | 153,012 | ||
| Static tip load, full turn (lbs) | 131,540 | ||
| Dump clearance, full height @ discharge (ft/in) | 17' 1" | ||
| Dump reach, full height @ discharge (in) | 107" | ||
| Bucket hinge pin height (in) | 301" | ||
| Bucket linkage type* | Z | ||
| Total cycle time: raise, dump & lower (sec) | 16.6 | ||
| Dimensions | |||
| Wheelbase (ft/in) | 19' 5" | ||
| Ground clearance (in) | 24" | ||
| Length w/bucket on ground (ft/in) | 52' 0" | ||
| Width over tires (ft/in) | -- | ||
| Height to top of cab (ft/in) | 19' 8" | ||
| Turn angle, either side (deg) | 43° | ||
| Turning radius, bucket carry (ft/in) | 37' 2" | ||
| Weight | |||
| Operating weight (lbs) | 296,119 | ||
| Engine | |||
| Engine make | Cat | ||
| Engine model | C32 ACERT | ||
| Net engine power (hp) | 950 | ||
| Drivetrain | |||
| Number of speeds (fwd/rev) | 3 / 3 | ||
| Transmission type* | PS | ||
| Max travel speed (mph) | |||
| Bucket | |||
| Bucket capacities, min-max (cu yds) | 16 - 31 | ||
| Bucket widths, min-max (in) | 200" - 203" | ||
| Reference: Bucket capacity (cu yds) | 18 | ||
| Reference: Bucket edge | Teeth | ||
| Tires | |||
| Reference tire size | 50/65 - 51 | ||
Bucket linkage type* = Parallel (P); Parallel w/bellcrank (PB); Parallel w/ floating bell crank (PFB); Telescopic extended (TE); Z-Bar (Z); Inverted Z-Bar (IZ); Torque parallel (TP);
Transmission type* = Hydrostatic (HS); Mechanical (Mech); Power shift (PS); Automatic (Auto); Automatic with manual shift (Auto/MS); Automatic multi-mode (Auto/MM); Power shuttle (Pwr shutl); Synchromesh (Sy); Torque converter (TC); Powersynchro (PwrSy)
Transmission type* = Hydrostatic (HS); Mechanical (Mech); Power shift (PS); Automatic (Auto); Automatic with manual shift (Auto/MS); Automatic multi-mode (Auto/MM); Power shuttle (Pwr shutl); Synchromesh (Sy); Torque converter (TC); Powersynchro (PwrSy)