Print
Comparing Crawler Excavators
Description |
|||
|---|---|---|---|
| Performance | |||
| Arm (stick) length used for dimensions & forces (ft/in) | 14' 5" | ||
| Max dig depth (ft/in) | 31' 8" | ||
| Max depth of vertical wall (ft/in) | 22' 6" | ||
| Reach @ ground level (ft/in) | 48' 2" | ||
| Dump height (ft/in) | 30' 5" | ||
| Depth @ 8' bottom (ft/in) | 31' 4" | ||
| Arm (stick) force* (lbs) | |||
| Bucket digging force* (lbs) | |||
| Lift over end, 20' radius @ ground (lbs) | 79,450 | ||
| Lift over side, 20' radius @ ground (lbs) | 63,500 | ||
| Dimensions | |||
| Transport length (ft/in) | 48' 3" | ||
| Transport height (ft/in) | 17' 4" | ||
| Transport width (ft/in) | 14' 0" | ||
| Length of track on ground (ft/in) | 16' 10" | ||
| Tail overhang over side (ft/in) | 8' 4" | ||
| Engine | |||
| Engine make | Cat | ||
| Engine model | Cat C18 ACERT | ||
| Net power (hp) | 523 | ||
| Hydraulics | |||
| Total flow of main pumps, implement & swing (gpm) | 259 | ||
| Max normal relief valve pressure (psi) | 5,076 | ||
| Weights | |||
| Operating weight (metric tons) | 86.2 | ||
| Operating weight (lbs) | 190,016 | ||
| Bucket | |||
| Bucket width, min-max (in) | 43" - 101" | ||
| Bucket capacity, SAE heaped, min-max (cu yds) | 2.8 - 8.5 | ||
| Blade | |||
| Blade (std, opt, none) | None | ||
| Max blade width (ft/in) | -- | ||
| Track | |||
| Track shoe or rubber track width (in) | 26" | ||
| Max travel speed (mph) | 2.8 | ||
| Max drawbar pull (lbs) | 132,637 | ||
Arm (stick) force* = Normal (N) digging forces are listed when published; otherwise boost values are shown.
Bucket digging force* = Normal (N) digging forces are listed when published; otherwise boost values are shown.
Bucket digging force* = Normal (N) digging forces are listed when published; otherwise boost values are shown.