Print

Comparing Toolcarriers

Description
 
 
Performance
 
Breakout force (lbs) 9,271
Static tip load, straight (lbs) --
Static tip load, full turn (lbs) --
Dump clearance, full height @ discharge (ft/in) 9' 8"
Dump reach, full height @ discharge (in) 25.9"
Bucket hinge pin height (in) 134"
Bucket linkage type* --
Total cycle time: raise, dump & lower (sec) 8.8
Dimensions
 
Wheelbase (ft/in) 7' 0"
Ground clearance (in) 10.9"
Length w/bucket on ground (ft/in) 16' 11"
Width over tires (ft/in) 6' 7"
Height to top of cab (ft/in) 9' 0"
Turn angle, either side (deg) --
Turning radius, bucket carry (ft/in) 12' 2.5"
Weight
 
Operating weight (lbs) 10,537
Engine
 
Engine make Case
Engine model 445T/M3 Tier 3
Net power (hp) 79
Drivetrain
 
Number of speeds (fwd/rev) 4 / 4
Transmission type* Sy/Pwr shutl
Max travel speed, fwd/rev (mph) 25.2 / 25.2
Bucket
 
Bucket capacities, min-max (cu yds) 1.03 - 1.04
Bucket widths, min-max (in) 82"
Reference: Bucket capacity (cu yds) 1.04
Reference: Bucket edge Bolt-on
Tires
 
Reference tire size 12x16.5 F; 19.5Lx24 R
Bucket linkage type* = Parallel (P); Parallel w/bellcrank (PB); Parallel w/ floating bell crank (PFB); Telescopic extended (TE); Z-Bar (Z); Inverted Z-Bar (IZ); Torque parallel (TP);

Transmission type* = Hydrostatic (HS); Mechanical (Mech); Power shift (PS); Automatic (Auto); Automatic with manual shift (Auto/MS); Automatic multi-mode (Auto/MM); Power shuttle (Pwr shutl); Synchromesh (Sy); Torque converter (TC); Powersynchro (PwrSy)